How to DIY Your Old Shoes

We all have an old pair of shoes that may need some care and attention from time to time. I can think of several pairs that have been gathering dust until the right DIY old shoes for a new project came along. Do you have any idea about DIY old shoes to new designs that can match the current trends? Worry no more! You are in the right place.

Get ready for a new you by pulling out your old shoes. From dyeing leather shoes to knitting your espadrilles, there is a wide variety of ways to customize your footwear.

This article highlights 12 DIY shoe ideas to transform your shoes for the new designs in the market.

12 DIY old shoes ideas to new

Paint-on canvas sneakers

• Choose a spotless pair of shoes to modify.
• Remove the shoelaces and place the old canvas sneakers in a lingerie bag before washing them.
• Throw the laces and shoes in the washer with four or six towels. The recommended wash time for most delicates is 30 minutes on a cold delicate cycle.
• Shoes need to dry naturally. Avoid drying them in a hot dryer since doing so could ruin the shoes.
• Paint a pair of shoes in the color of your choice.

Drawing your shoes

• Make a rough draft of the shoe decorations you want to draw.
• Make plans for the shoes from every angle by drawing top and side views. Create a detailed illustration at the appropriate scale so you can translate it onto the shoes.
• Put newspaper or plastic bags into the shoes to give them structure.
• Use a pencil to sketch the pattern on the sneakers.
• Using graphite, put the design on the sneakers.
• Use permanent markers to decorate the sneakers however you choose.

Improvements to shoes through the use of fabric trims

• Make a plan for your design and sketch it out using the components.
• Wrap tassels and pom poms around the straps to jazz up a pair of sandals.
• You can embellish your footwear using hot glue, ribbon bows, fabric flowers, or felt shapes.
• Attach dangling charms to a pair of sandals.

Using Stick-On Accessories to Glam Up Shoes

• Dress up a pair of shoes with some adhesive-backed rhinestones, crystals, or patches.
• Make anything look three-dimensional by painting it with puffy paint or gluing on glitter.
• You may use Mod Podge and loose glitter to glam up a pair of kicks.

Mermaid shoe designs

Like many of you, we’ll spend some time with our loved ones at home during the next few days. Get out your worn-out sneakers and your empty craft supply box if you need a good time. This offers you an opportunity to engrave mermaid designs on your old shoes. All you need is Beacon adhesives fabric-tac, canvas Shoes, fabric, sequins, and chalk to get your best mermaid designs.

DIY pineapple paintings on old shoes

Get a pair of canvas shoes as a starting point. When you draw out the plan beforehand, getting everything arranged the way you want is much simpler.

Draw out your design on one shoe with a vanishing ink pen so that the ink will fade over time. Mix up the pineapples’ orientation so that some are on their sides and some are upright, and make sure there’s enough space for the leaves on top.

Rainbow tie-dye shoes

• You can protect the parts of the shoes you don’t want to dye by taping them off.
• Thoroughly combine the water and color before applying them to your shoes.
• Sprinkle the dye lightly on your footwear.
• Once the shoe dyeing process is complete, seal the shoes in a plastic bag. You should leave the shoes out overnight to dry.

Stylish Sneaker Patterns for Embroidery

• Take off your shoes and thread the needle with your primary color. Attach the thread’s tail to a free shoelace eyelet.
  • Create designs and stitching with threads of varying colors, then apply them to the sneaker.
  • Add bling to your kicks by stringing beads onto the needle and stitching them on.

Modernizations of ballet shoes

• Wipe off an old pair of footwear, and then use tape and scrap paper to cover the portions you don’t want to paint.
  • Apply the paint by spraying it onto the shoe’s tips and letting it dry. Use two coats if possible.
  • After the sealant has dried, the tape and paper can be carefully peeled away.
  • After waiting for the sealant to dry, you can add a finishing touch to each pair of shoes by measuring and cutting lace trim to fit around the painted regions. If you want anything to stick for good, use glue designed for industrial use.

Watercolor shoe makeover

• To evaluate the tone of your blended colors, dilute them with water and place a paper towel over them.
  • It’s time to get busy with the shoe paint.
  • After the paint has dry, coat the whole shoe with a mixture of 3 parts water to 1 part fabric medium.

Glitter shoe designs

• If you want to keep your tabletop in pristine condition while you work, lay out a tablecloth
  • You should untie both shoes. Line them with clear tape to prevent paint from seeping into the shoes’ rubber.
  • Use the paintbrush to decorate the shoe’s fabric.
  • Please wait while the primer dries. Apply a coat of glitter paint once the base coat has dried.
  • At the end of the twenty-four hours, remove the transparent tape from the footwear.

Tie-dye sharpie shoes

• Apply masking tape over the rubber bottom of your shoes to prevent color from seeping through.
  • Draw your pattern on your sneakers with the Sharpie pens.
  • Make the colors run all over the sneaker by spraying rubbing alcohol from a spray bottle.
  • Get it dry.
  • If you aren’t satisfied with the outcome, try again.

DIY old shoes to new FQAs

1. How do I choose a design for my shoes?

Research popular shoe designs and choose a design that matches your style. Consider colors, patterns, and textures that you like.

2. What materials do I need to DIY my shoes?

Gather materials like fabric, paint, glitter, and embellishments. Make sure you have the right glue and paint for your fabric.

3. How do I prepare my shoes for DIY?

Clean and dry your shoes thoroughly. If necessary, sand the surface to create a smooth texture.

4. How do I add a design to my shoes?

Use your chosen materials to create your design. Make sure to use the right glue and paint for your fabric.

5. How do I finish my DIY shoes?

Once you’re done with your design, seal it with a clear coat of sealer. Allow your shoes to dry completely before wearing them.

DIY old shoes to new conclusion

Are you looking to DIY your old shoe designs? You can apply various techniques to make the best of your old shoes. Consider either of the above ways to transform your old shoes completely.

Learn more shoe tips in Sizzey!