How to Effectively Protect the Shoe Sole?

Have you ever paid attention to the question of protecting shoe soles? The shoe sole is sometimes referred to as two separate pieces: insole and outsole. The insole is part of the shoe that has direct contact with the bottom of your foot. The shoe’s outsole is the portion that contacts the ground when you walk. How to protect your shoe sole? This issue is more about the outsole as it’s affected by more factors. This article will tell you the reason why shoe soles wore out so fast and offer various ways to protect them.

How to protect the shoe sole

Use rubber protectors

Adding a rubber sole protector to your leather-soled shoes can slow down the constant wear and tear on the soles of your shoes while walking. If you walk more often it will cause the child to wear out within 4-6 months. Rubber sole protectors are the most common ways to protect them. Using a rubber sole to sole by yourself, you can extend the life of the shoe and save on shoe repair costs.

First, clean the surface of the sole, scraping off the old glue from the previous sole protector.

Then, mark the proper location of the sole protector and trim the sole protector to the correct size before applying glue.

Third, apply plasticine and attach the half sole and heel raise. You can wrap the shoe tightly with string and let the glue cure for at least five hours.

Finally, check whether the rubber protector is firmly installed after the glue has been set.

Add toe taps

Add toe taps to your shoes to prevent premature wear and tear. No matter how careful you are, the toe area of your shoes will wear out faster than the rest of the shoe. Installing toe taps in your shoes can extend the life of your shoes with a small monetary investment.

Firstly, clean the surface of the sole and scrape off the dirt left on the bottom of the shoe before.

Toe taps are usually made out of rubber or silicon. Many types of shoes can use them. You only need to stick them on. They are self-adhesive, so they act like stickers.

Finally, ensure that the toe tap is firmly attached and complete.

Add heel caps

Heel caps are used to protect the heels of women’s high heels. This is a good option for those who are trying to repair their heels and prevent future heel damage. These do not require any complicated work, as you usually just need to put the purchased heel cap on the end of the heel. And be careful to replace the heel cap with a new one promptly. Because once the nail in the heel gets into a position where it can’t be repaired, then all your efforts to protect the bottom of your shoe could go down the drain!

Store them in a cool and dark place

When you store your shoes, try to keep them in a dry, sunless environment. If the shoes are wet for a long time, it is easy to cause the soles of the shoes to come off. This is one of the reasons why we usually try not to get our shoes wet.

If the shoes are often exposed to the sun, it will also be easy to cause the glue to come off and the bevel to crack.

The way you store your shoes at home is just as important as the way you wear them out. Don’t simply toss your shoes into the closet, as this increases the chances of scratches and other damage.

Knowing the way to protect the shoe sole, then learning more about our shoes.

Why do the soles of my shoes wear out so fast?

There are two important reasons why the soles are easy to wear out. One is the material problem, and the other is the problem of friction and walking posture.

The material problem is related to your shoe’s upper and outer soles. They all influence how your shoes will age and how good or bad they’ll look over time.

When you move around, you’re placing different amounts of weight on different parts of your foot. Your gait can show a pattern of neutral pronation, under pronation, or overpronation. This can also lead to wear and tear on the soles of the shoes to varying degrees

What is the most durable shoe sole material?

Shoe soles are mainly made of rubber, leather, polyurethane (PU), polyvinyl chloride (PVC), and ethylene-vinyl acetate (EVA). Each of these has different properties that make them unique. Polyurethane soles are lightweight, resilient, and flexible, and have good ground insulation and shock-absorbing properties. These soles have the best durability performance. Regardless of the material of the sole, they all wear down over time.

How to protect the shoe sole FAQs

1. What is a shoe sole protector?

A sole protector is a thin piece of rubber that can be placed on the sole of your shoe. They protect your shoes from wear and tear, thereby limiting the number of times you need to take them off. Do not wait too long as the longer you leave your soles exposed, the more expensive they are to rebuild or completely resolve again.

2. What is the best thing to preserve rubber?

Ideally, rubber and plastic products should be stored in cold, dark, dry, and oxygen-free conditions. These conditions can be found in the cold section of a frost-free refrigerator or a cold room with low relative humidity.

3. Are rubber shoes breathable?

Rubber shoes were created with ventilation in mind. The fabric used in their construction has been carefully chosen to allow air to circulate in and out, keeping your feet dry and preventing sweat buildup, which can lead to unpleasant odors. Furthermore, some brands now include specialized breathable technology within the shoe design, allowing for even more airflow and keeping your feet feeling fresh throughout the day.

4. How can I waterproof my shoes naturally?

You can use beeswax, soy wax, carnauba wax, bayberry wax, candelilla wax, or whatever type of wax you can find. Next, rub the wax on the shoe or boot, scraping the wax against the surface of the foot ware. Be sure to cover the entire surface, not missing any spots.

5. Should I oil leather soles?

If you are attending an outdoor event and you know the weather is going to be damp, be advised that your leather-soled shoes can suffer. Regular application of a sole conditioner such as Angelus Mink Oil or Neatsfoot Oil will improve water resistance.